Frequently, customers ask whether the
safety grating has a controller. It does not need to be equipped with a
controller. There is no uniform answer to this question. It is necessary
to answer the specific situation. Simply speaking, it is to see where
you are using the machine. 24V and PLC.
All (regardless of brand
and whether imported) safety gratings work at DC12-24V, most of which
are transistor outputs (NPN or PNP), a small part is the relay output,
the relay output is either equipped with a controller, or There are
small relays inside the grating, and the actual principle is still the
same. The transistor output is directly controllable by the PLC or
relay.
Therefore, for an automation device with PLC, the grating
itself can be directly controlled, and no controller is needed. For
safety equipment with no PLC and DC 24V, this best option controller is
more convenient and simple to use.