Spray detection grating

The spray detection grating uses synchronous scanning to identify the blocked channel; the illuminator channel emits a light pulse and the corresponding receiver simultaneously looks for the pulse, and when found, completes a channel scan and then moves to the next channel until all scans All done. When a cycle scan is completed, the system records those channels through, and those channels are occluded. A signal is output according to the system definition. The signal can be an analog signal, a digital signal, or an RS485 communication signal.
       The photoelectric scanning system is an automatic control device for spraying surface, which is composed of a set of sensors. The sensor is composed of a transmitter and a receiver. The infrared sensors are connected to the controller through signal lines, and the transmitter and the receiver are disposed at the entrance of the spraying machine. In front. The aluminum alloy profile to be sprayed is suspended from the moving bracket, passes between the transmitter and the receiver at a constant speed, and then passes through the automated nozzle. The sensor detects the length of the aluminum alloy profile through the infrared receiver and transmits the signal to the controller. The controller calculates the time delay according to the distance between the receiving seat and the spraying machine and the moving speed of the moving bracket, and controls the spraying machine to arrive at the aluminum alloy profile. Change the vertical round-trip distance of the gun to avoid spraying the paint in the neutral position, saving paint and reducing pollution.